New Design with USB 2.0 and eSATA Port.

True Hot-plug and Hot-Swap USB 2.0 Adapter with 2Amp Power Supply, Great Test Bench Device. Converter for SATA HDD, conect any SATA Device to your USB 2.0 Port!

CHIPSET: Jmicron-JM20336 Single Chip Ultra Fast Solution

USB 2.0 Adapter to any Native SATA 3.5 Drive from 80GB up to 2000GB(2TB). Compatible with Windows ME/2000/XP/2003/Vista.Works with MAC OS X.3.6 or Greater!

Adapter plugs directly to your usb 2.0 port on a windows based computer and provides one SATA Signal/Power port to connect directly into your SATA 3.5inch or 2.5inch HDD.

Uses Jmicron Chip for Conversion.

Tested with WD/Maxtor/Seagate/Hitachi SATA drives.

Package includes Adapter cable and one DC 2AMP Power Adapter provides external power to your drive.

USB2.0 to serial ATA translation. It includes the Jmicron Worlds First Single Chip SATA HDD to USB 2.0& Serial ATA PHY, Link, Transport. The Serial ATA physical, link, and transport layers are compliant to Serial ATA 1.0 , converter supports a SATA 1.5GHz and 3.0GHz data rate & USB2.0 480MHz data rate . The application layer supports both the ATA register command set and PACKET command set, which could drive SATA Hard Disk.

With LED Indicated power and Back-UP Software Button.

Support Win-98se,Win-98me need driver

Support Win-2000,Win-xp free driver

Easy install & free driver

Max speed (Read + Write) : 48M Byte

USB2.0 Specification compliant

USB2.0 JMICRON 20337 newest chipset installed

Serial ATA 1.0 Specification compliant

Automatic Serial ATA 1.5/3.0 Gbps speed negotiation

Support USB2.0 plug & play

Support Serial ATA hot-plug

Ultra low power consumption

Work for both AC and DC couple between the transmitter and the receiver

Provide specified OOB signal detection and transmission

Support Spread Spectrum Clocking to reduce EMI

Support Partial/Slumber power management

Provide adjustable TX signal amplitude and pre-emphasis level

*****************************************

Random Write 26MB/s

------------------

Suitable for SATA devices Support eSATA to SATA interface,transfer rate up to 1.5Gb/s(SATA I),3.0Gb/s(SATA II)

Support USB2.0 to SATA interface,transfer rate up to 480Mb/s

Furnish standard e-SATA port for external SATA device

One touch backup function

Bus power for 2.5" SATA HDD

5V/12V Power Supply for 3.5"/5.25" devices

Under Windows 2000/me/XP,no driver needed

********Includes***********

Driver CD 1PCS

Users Manual 1PCS

Power supply 1PCS

USB data cable 1PCS

AC Power supply 1PCS

* Please Note: eSATA Cable is not provided

Important Technical Information: eSATA and USB 2.0 COMBO UNIT! HOT-PLUG AND HOT-SWAP MODEL USB to SATA HDD ADAPTER WITH RESET QUICK SWAP BUTTON. Connect black USB plug to USB port on computer.

Qty: